Estimasi Penurunan Berat Kapal dengan Aplikasi Struktur Sandwich pada Double Hull Tanker 5704 DWT

Heni Siswanti, Siti Ahdiatun Nurzanuba, M. Musta'in

Abstract


Double hulls on tankers are a must to protect the environment from the oil spill effects of ship leakage. However, a double hull structure produces a heavy structure, reducing the payload. For decades, designers have tried reducing the structure's weight by applying lightweight material such as polyurethane-steel sandwich. Strong steel faceplates with a low-density polyurethane core promise significant weight reduction. Nevertheless, structural strength remains a major consideration in the design of sandwich structures. This study evaluates the structural weight reduction of replacing a conventional stiffened plate structure with a sandwich structure on a double hull tanker 5704 DWT. It also analyzes the structural strength using the finite element method. The results show that applying a sandwich structure on a double-hull tanker significantly reduced the structure's weight without decreasing structural strength. It is proven that the application of sandwich structure potentially increases ship payload.


Keywords


double hull; sandwich; weight; strength; payload

Full Text:

PDF

References


C. Iman, Q. A. Ganaie dan G. Saini, “The Exxon Valdez Oil Spill: A review,†International Journal of Technical Innovationn in Modern Engineering & Science, vol. 5, no. 4, pp. 220-223, 2019.

D. Mantoju, “Ananlysis of MARPOL Implementation based on Port State Control Statistics,†Journal of International Maritime Safety, Environtment Affairs, and Shipping, vol. 5, no. 3, pp. 132-145, 2021.

Zulaila dan H. Siswanti, “Perhitungan Konstruksi Kapal Tanker Single Hull Menjadi Double Hull (Studi Kasus MT. Dewi Sri 3557 DWT),†Jurnal Techno Bahari, vol. 5, no. 2, pp. 25-30, 2018.

K. Ramakrishnan dan P. Kumar, “Application of Sandwich Plate System for Ship Structures,†IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), pp. 83-90, 2016.

P. Kujala dan A. Klanac, “Steel Sandwich Panel in Marine Applications,†BRODOGRADNJA, vol. 56, no. 4, pp. 305-314, 2005.

A. Ismail, A. Zubaydi, B. Piscesa dan E. Panangian, “A comparative study of conventional and sandwich plate side-shell using finite element method,†dalam 2nd International Conference on Mechanical Engineering Research and Application (iCOMERA 2020), 2020.

M. Brooking dan S. Kennedy, “The performance, safety and production benefits of SPS structures for double hull tankers,†dalam Proceedings of the RINA Conference on Double Hull Tankers, London, UK, 2004.

A. Ismail, A. Zubaydi, B. Piscesa dan Tuswan, “Study of Sandwich Panel Application On Side Hull Of Crude Oil Tanker,†Journal of Applied Engineering Science, 2021.

N. Momcilovic dan M. Motok, “Estimation of ship lightweight reduction by means of application of sandwich plate system,†FME Trans vol. 37, no. 3, p. 123–128, 2009.

J. Kortenoeven, B. Boon dan A. De Bruijn, “Application of sandwich panels in design and building of dredging ships,†J. Sh. Prod., vol. 24, no. 3,, p. 125–134, 2008 .

S. J. Kennedy, J. Bond, D. Braun dan N. P. G., “An Innovative “No Hot Work†Approach to Hull Repair in In-Service FPSOs Using Sandwich Plate System Overlay,†Offshore Technology Conference, 2003.

H. V. Mahajan dan S. R. Parekar, “Sandwich Plate System in Bridge Deck- A Review,†International Research Journal of Engineering and Technology (IRJET), vol. 5, no. 4, pp. 552-554, 2018.

C.-o. A. SANDCORe, “Best Practice Guide for Sandwich Structures in Marine Applications,†University of Newcastle upon Tyne, New Castle, 2013.

A. Ismail, A. Zubaydi, B. Piscesa dan E. Panangian, “A strenght analysis of conventional and sandwich plate deck using Finite Element Method,†dalam IOP Conference Series: Materials Science and Engineering, Vol 1034, 2020.

Tuswan, K. Abdullah, A. Zubaydi dan A. Budipriyanto, “Finite-element analysis for structural strength assessment of marine sandwich material on ship side-shell structure,†dalam Materials Today: Proceedings, vol. 13, no. 1, 2019.

G. Palomba, G. Epasto dan V. Crupi, “Lightweight sandwich structures for marine applications: a review,†Mechanics of Advanced Materials and Structures, 2021.

Tuswan, A. Zubaydi, A. Budipriyanto dan S. Sujiatanti, “Comparative study on ferry ro-ro’s car deck structural strength by means of application of sandwich materials,†dalam The 3rd International Conference on Marine Technology vol. 1, 2018.

Lloyd’s-Register, Rules for the Application of Sandwich Panel Construction to Ship Structure, Lloyd’s Register, 2020.

D. L. Logan, A First Course in the Finite Element Method, 4th penyunt., Thomson, 2007.

BKI, Rules for the Classification and Construction of Seagoing Steel Ship, Vol II (Rules for Hull), Biro Klasifikasi Indonesia, 2020.




DOI: https://doi.org/10.35314/ip.v13i2.3632

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 INOVTEK POLBENG


This Journal has been listed and indexed in :

         

Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License