Rancang Bangun Alat Pengepress Ban Elektrik untuk Merekatkan Ban Secara Otomatis

Musthafa Adam Flora, Madyono Madyono, Budi Nur Iman

Abstract


The tire patch tools that we often encounter on the side of the road mostly use traditional tire filling tools with the manual press method and heating on an iron plate. And use spiritus that is burned in the furnace to glue the patch. The process of patching tires takes a long time and sometimes the patcher has to make sure, whether the patch is glued or not. The problem is when opening the patch too quickly results in the patch not being completely glued. Likewise, when patching for too long will damage the tire surface. From this problem came the idea to make a tire patch tool with a display to find out the temperature when the tire patch tool works and also the length of time for the tire patch so that the tire patch automatically stops. This tool will be implemented on the surrounding tire patch. This study aims to determine the optimal temperature for tire filling to produce good fillings in a short time when compared to the usual tire filling time. In this research, we use a thermocouple sensor, Arduino Pro mini, organic light-emitting diode (oled), and a dc motor. The results of the filling with the specified temperature and time variations obtained good and bad results. The optimal temperature for tire patching in this test is at 70 ÌŠ C the temperature on the heating plate, with perfect patching results for 1 minute 50 seconds. The heat transfer rate on the plate is 37,763 watts and the heat transfer rate on the tires is 0.45 watts.


Keywords


optimal temperature; time; oled; thermocouple

Full Text:

PDF

References


I. M. Arsana, A. Gufron and S. R. Ariyanto, “Analisis Penambalan Ban pada Alat Penambal Ban Dengan Pengontrol Suhu Otomatis,†Journal Penelitian Saintek, pp. 126- 139, 2017.

A. Ashari, A. Mufrida and A. E. N, “Analisis Perpindahan Panas pada Tambal Ban Elektrik,†Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin, vol. 01, pp. 37-42, 2016.

A. Jufri, “Rancang Bangun dan Implementasi Kunci Pintu Elektronik Menggunakan Arduino dan Android,†Jurnal STT STIKMA Internasional, vol. 7, pp. 40-41, 2016.

A. Susanto, “Analisis Cacat Produk Ban Vulkanisir Jenis Truk dan Bus pada CV. Sigma Jaya Surakarta,†UNS-Fak. KIP Jurnal Pendidikan Teknik dan Kejurusan, pp. 1-13, 2013.

A. Wibowo and L. A. Supriyono, “Analisis Pemakaian Sensor Loadcell dalam Perhitungan Berat Benda Padat dan Cair Berbasis Mikrokontroller,†Jurnal Elektronika dan Komputer, vol. 12, pp. 1-5, 2019.

R. Hidayat and Mu'alim, “Perancangan dan Pengembangan Press Ban Elektrik Otomatis,†UMS Jurnal, pp. 201-212, 2013.

R. Mustofa, H. Istiasih and R. Santoso, “Alat Pemanas Ban Otomatis,†Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), vol. 4, pp. 095-098, 2020.

K. Bull, “Thermistors and Thermocouples: Matching the Tool to the Task in Thermal Validation,†Journal of Validation Technology, vol. 14, no. 2, pp. 73-76, 2008.

W. Zhengyu, Y. Xiaoyang, L. Guanghui and T. Guangyu, “Online Cutting Temperature Measurement System Based Thermocouple,†International Journal of Control and Automation, vol. 7, no. 10, pp. 355-364, 2014.

B. Sumarsono, Perancangan Aplikasi Mobile Tambal Ban Terdekat Di Kabupaten Sleman Menggunkan Location-Based Services Platform Android, Yogyakarta: Repository Amikom, 2015.




DOI: https://doi.org/10.35314/ise.v3i2.2022

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 INOVTEK - Seri Elektro

View My Stats