Study Penggunaan Steel-Based Hybrid Sanwich Plate ASTM A36 dengan Core Material Polyurethane Elastomer pada Konstruksi Kapal

Heni Siswanti, Muhammad Musta'in, Muhammad Musta'in, Tristiandinda Permata, Tristiandinda Permata, Arisessy Mulananda, Arisessy Mulananda

Abstract


Conventional ship structures usually consist of a stiffened plate. The intersection of the secondary stiffener of the stiffened plate structure is the critical position with a high potential for structural damages such as fatigue crack. The recent development of material technology in the marine industry is how to find the strength and lightweight material and also minimize structural problems such as fatigue cracks. One of them is the application of sandwich plates to replace the stiffened plate construction. Steel-based hybrid sandwich plates consist of two steel faceplates and elastomer core material bonded by adhesive. This study has analyzed the application of steel-based hybrid sandwich plates to replace stiffened plates on the oil tanker’s inner bottom structure. The strength of three configurations of the inner bottom sandwich structure has been analyzed by using the Finite Element Method and compared to conventional stiffened plate structure. The maximum stress, average stress, maximum deformation, and weight of the structure have been compared and analyzed. The results show that the application of a hybrid sandwich with a certain stiffener configuration can reduce stress, deformation, and weight of the inner bottom structure.


Keywords


hybrid sandwich; stiffener; stress; deformation; weight

Full Text:

PDF

References


E. Utomo, A. Zubaydi dan P. Pratisna, “Study of Core Material Sandwich Panel in Ship Construction,†dalam The 2nd International Seminar on Science and Technology, Surabaya, 2016.

S. Sujiatanti, A. Zubaydi dan A. Budipriyanto, “Finite element analysis of ship deck sandwich panel,†Applied Mechanics and Materials 874, no. DOI: 10.4028/www.scientific.net/AMM.874.134, pp. 134-139, 2018.

N. Momcilovic dan M. Motok, “Estimation of ship lightweight reduction by means of application of sandwich plate system,†FME Trans vol. 37, no. 3, p. 123–128, 2009.

Lloyd’s Register, Rules for the Application of Sandwich Panel Construction to Ship Structure, Lloyd’s Register, 2020.

H. Ardhyananta, E. Sari, S. Wicaksono, H. Ismail, Tuswan dan A. Ismail, “Characterization of Vinyl Ester Bio-resin for Core Material Sandwich Panel Construction of Ship Structure Application: Effect of Palm Oil and Sesame Oil,†dalam AIP Conference Proceedings 2202, 2019.

K. Abdullah, A. Zubaydi dan A. Budipriyanto, “Aplikasi Sandwich Plate System Berbahan Core Limbah Cangkang Kerang pada Geladak Kapal,†Jurnal Wave, Vol. %1 dari %2Volume 12, No. 2, 2018.

A. Ismail, A. Zubaydi, B. Piscesa, E. Panangian, R. Ariesta dan Tuswan, “A strenght analysis of conventional and sandwich plate deck using Finite Element Method,†IOP Conference Series: Materials Science and Engineering, Vol 1034, 2020.

J. Andric, S. Kitarovic, V. Radolovic dan P. Prebeg, “Structural analysis and design of a car carrier with composite sandwich deck panels,†Ships and Offshore Structures, 2019.

Tuswan, A. Zubaydi, A. Budipriyanto dan S. Sujiatanti, “Comparative study on ferry ro-ro’s car deck structural strength by means of application of sandwich materials,†dalam The 3rd International Conference on Marine Technology vol. 1, 2018.

A. Ismail, A. Zubaydi, B. Piscesa, E. Panangian, R. Ariesta dan Tuswan, “A comparative study of conventional and sandwich plate side-shell using finite element method,†dalam 2nd International Conference on Mechanical Engineering Research and Application (iCOMERA 2020), 2020.

A. Ismail, A. Zubaydi, B. Piscesa, Tuswan dan R. C. Ariesta, “Study of Sandwich Panel Application On Side Hull Of Crude Oil Tanker,†Journal of Applied Engineering Science, 2021.

Tuswan, K. Abdullah, A. Zubaydi dan A. Budipriyanto, “Finite-element analysis for structural strength assessment of marine sandwich material on ship side-shell structure,†dalam Materials Today: Proceedings, vol. 13, no. 1, 2019.

M. Brooking dan S. Kennedy, “The performance, safety and production benefits of SPS structures for double hull tankers,†dalam Proceedings of the RINA Conference on Double Hull Tankers, London, UK, 2004.

T. J. Grafton dan J. R. Weitzenbo€ck, “Steel-concrete-steel sandwich structures in ship and offshore engineering,†dalam Advance Marine Structure Proceedings of the 3rd International Conference on Marine Structures, 2011.

K. Ramakrishnan dan P. Kumar, “Application of Sandwich Plate System for Ship Structures,†IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), pp. 83-90, 2016.




DOI: https://doi.org/10.35314/ip.v12i2.2718

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 INOVTEK POLBENG

This Journal has been listed and indexed in :

         

Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License